在MacBook Pro上安装了Fedora 26操作系统,桌面是LXQt,设置了合上笔记本屏幕就进入suspend,但是,非常头疼的时,过几秒种就立即启动起来,导致笔记本放在包里面烫得不得了(和烧热的铁板一样)。

检查message日志显示系统suspended之后,立即被ACPI唤醒

...
Nov  7 21:23:04 DevStudio kernel: smpboot: CPU 4 is now offline
Nov  7 21:23:04 DevStudio kernel: IRQ 33: no longer affine to CPU5
Nov  7 21:23:04 DevStudio kernel: smpboot: CPU 5 is now offline
Nov  7 21:23:04 DevStudio kernel: IRQ 18: no longer affine to CPU6
Nov  7 21:23:04 DevStudio kernel: smpboot: CPU 6 is now offline
Nov  7 21:23:04 DevStudio kernel: smpboot: CPU 7 is now offline
Nov  7 21:23:04 DevStudio kernel: ACPI: Low-level resume complete
Nov  7 21:23:04 DevStudio kernel: ACPI: EC: EC started
Nov  7 21:23:04 DevStudio kernel: PM: Restoring platform NVS memory
Nov  7 21:23:04 DevStudio kernel: Suspended for 2.688 seconds
Nov  7 21:23:04 DevStudio kernel: Enabling non-boot CPUs ...
Nov  7 21:23:04 DevStudio kernel: x86: Booting SMP configuration:
Nov  7 21:23:04 DevStudio kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Nov  7 21:23:04 DevStudio kernel: cache: parent cpu1 should not be sleeping
Nov  7 21:23:04 DevStudio kernel: CPU1 is up
Nov  7 21:23:04 DevStudio kernel: smpboot: Booting Node 0 Processor 2 APIC 0x4
Nov  7 21:23:04 DevStudio kernel: cache: parent cpu2 should not be sleeping
Nov  7 21:23:04 DevStudio kernel: CPU2 is up
Nov  7 21:23:04 DevStudio kernel: smpboot: Booting Node 0 Processor 3 APIC 0x6
Nov  7 21:23:04 DevStudio kernel: cache: parent cpu3 should not be sleeping
Nov  7 21:23:04 DevStudio kernel: CPU3 is up
Nov  7 21:23:04 DevStudio kernel: smpboot: Booting Node 0 Processor 4 APIC 0x1
Nov  7 21:23:04 DevStudio kernel: cache: parent cpu4 should not be sleeping
Nov  7 21:23:04 DevStudio kernel: CPU4 is up
Nov  7 21:23:04 DevStudio kernel: smpboot: Booting Node 0 Processor 5 APIC 0x3
Nov  7 21:23:04 DevStudio kernel: cache: parent cpu5 should not be sleeping
Nov  7 21:23:04 DevStudio kernel: CPU5 is up
Nov  7 21:23:04 DevStudio kernel: smpboot: Booting Node 0 Processor 6 APIC 0x5
Nov  7 21:23:04 DevStudio kernel: cache: parent cpu6 should not be sleeping
Nov  7 21:23:04 DevStudio kernel: CPU6 is up
Nov  7 21:23:04 DevStudio kernel: smpboot: Booting Node 0 Processor 7 APIC 0x7
Nov  7 21:23:04 DevStudio kernel: cache: parent cpu7 should not be sleeping
Nov  7 21:23:04 DevStudio kernel: CPU7 is up
Nov  7 21:23:04 DevStudio kernel: ACPI: Waking up from system sleep state S3

导致上述休眠(suspended)之后立即被唤醒,是因为ACPI电源管理wakeup中有某个激活的设备触发导致的。具体是哪个设备需要检查自己笔记本的配置。

  • 检查wakeup事件:
cat /proc/acpi/wakeup

在我的笔记上上显示输出

Device  S-state   Status   Sysfs node
P0P2      S3    *disabled  pci:0000:00:01.0
GFX0      S3    *disabled  pci:0000:01:00.0
PEG1      S3    *disabled  pci:0000:00:01.1
EC        S4    *disabled  platform:PNP0C09:00
GMUX      S3    *disabled  pnp:00:03
HDEF      S3    *disabled  pci:0000:00:1b.0
RP03      S3    *disabled  pci:0000:00:1c.2
ARPT      S4    *disabled  pci:0000:03:00.0
RP04      S3    *disabled  pci:0000:00:1c.3
RP05      S3    *disabled  pci:0000:00:1c.4
XHC1      S3    *enabled   pci:0000:00:14.0
ADP1      S4    *disabled  platform:ACPI0003:00
LID0      S4    *enabled   platform:PNP0C0D:00

也就是说,系统中有两个可能触发唤醒的设备分别如下

Device  S-state   Status   Sysfs node
XHC1      S3    *enabled   pci:0000:00:14.0
LID0      S4    *enabled   platform:PNP0C0D:00
  • 要尝试禁用某个设备唤醒,只要将这个设备echo/proc/acpi/wakeup就可以关闭
echo XHC1 | sudo tee /proc/acpi/wakeup
  • 然后再次检查wakeup事件,就可以看到只有LID0可以唤醒系统
Device  S-state   Status   Sysfs node
P0P2      S3    *disabled  pci:0000:00:01.0
GFX0      S3    *disabled  pci:0000:01:00.0
PEG1      S3    *disabled  pci:0000:00:01.1
EC        S4    *disabled  platform:PNP0C09:00
GMUX      S3    *disabled  pnp:00:03
HDEF      S3    *disabled  pci:0000:00:1b.0
RP03      S3    *disabled  pci:0000:00:1c.2
ARPT      S4    *disabled  pci:0000:03:00.0
RP04      S3    *disabled  pci:0000:00:1c.3
RP05      S3    *disabled  pci:0000:00:1c.4
XHC1      S3    *disabled  pci:0000:00:14.0
ADP1      S4    *disabled  platform:ACPI0003:00
LID0      S4    *enabled   platform:PNP0C0D:00

再次验证就发现休眠作用已经工作正常。

另外,如果要禁用多个设备,如XHC EHC1 EHC2,可以使用如下脚本

for device in XHC EHC1 EHC2; do
    grep $device /proc/acpi/wakeup | grep enabled > /dev/null && {
        echo Disabling wakeup on $device 
        echo $device > /proc/acpi/wakeup
    }
done

参考

results matching ""

    No results matching ""