和 在Gentoo中使用broadcom无线网卡 类似,在初次安装使用Fedora操作系统时,是不能识别Broadcom BCM4360无线网卡的。
Broadcom b43驱动可以用于 Broadcom SoftMAC chipsets 但是不支持 BCM4360芯片。可以使用wl驱动来代替。
方法一:编译(该方法未测试成功)
安装方法参考No wifi after kernel upgrade即:
- 安装akmod,使用它来重建模块
# akmods --force
Checking kmods exist for 4.0.4-303.fc22.x86_64 [ OK ]
Building and installing wl-kmod
# modprobe wl
确系统中有wl驱动加载
方法二:脚本(未验证)
Broadcom BCM4360 not working in Fedora 24提供了一个安装BCM4360驱动方法:
- 通过脚本安装
dnf update -y
wget http://git.io/vuLC7 -v -O fedora23_broadcom_wl_install.sh
sh ./fedora23_broadcom_wl_install.sh
fedora23_broadcom_wl_install.sh
脚本如下
#/usr/bin/env bash
# Install some pacakages we'll need to compile the driver below.
sudo dnf install gcc kernel-devel -y
# Create working dir for Broadcom driver files and patches.
mkdir hybrid_wl_f23
# Change to working dir.
cd hybrid_wl_f23
if [ 'x86_64' == `uname -m` ]; then
# 64-bit driver files.
FILE='hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz'
else
# 32-bit driver files.
FILE='hybrid-v35-nodebug-pcoem-6_30_223_271.tar.gz'
fi
# Download Broadcom Linux Wi-Fi driver.
wget http://www.broadcom.com/docs/linux_sta/$FILE
# Extract driver files.
tar zxvf $FILE
# Compile driver.
make clean && make
# Install driver.
sudo make install
# Update available drivers.
sudo depmod -a
# Unload conflicting drivers.
sudo rmmod b43 ssb bcma
# Load the driver.
sudo modprobe wl
# Blacklist conflicting drivers.
printf 'blacklist b43\nblacklist ssb\nblacklist bcma\n' | sudo tee /etc/modprobe.d/wl.conf
# Load driver automatically at boot time.
echo 'wl' | sudo tee /etc/modules-load.d/wl.conf
# Connect to a Wi-Fi network via NetworkManager...
方法三:wl驱动(非常简便,推荐)
参考 Running Broadcom BCM4630 on Fedora 19
安装闭源驱动:从 http://www.rpmfusion.org/ non-free repo 下载wl 安装软件包 kmod-wl
RPM Fusion是提供Fedora和Red Hat没有发行版发布的软件,这些软件是预先编译好提供给所有Fedora版本和RHEL及clone版本。
针对Fedora 26需要下载和安装以下两个软件包:
上述两个软件包依赖非常多,所以需要通过添加repo方式来安装
- 添加rpmfusion repo源
yum localinstall http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm
yum localinstall http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm
- 更新系统
yum update
- 重启
reboot
- 安装网卡驱动
yum install kernel-devel akmod-wl
sudo akmods
- 完成后如果没有wifi设备,手动加载
检查模块
sudo lsmod | grep wl
如果模块没有加载则执行命令
sudo modprobe wl