本文汇总一些检查磁盘io的方法和脚本供参考。
lsof检查文件访问
lsof可检查某个磁盘上的读写进程
gddg:~ # lsof /dev/xvda2 |head
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
init 1 root cwd DIR 202,2 4096 2 /
init 1 root rtd DIR 202,2 4096 2 /
init 1 root txt REG 202,2 40784 193218 /sbin/init
init 1 root mem REG 202,2 19114 8063 /lib64/libdl-2.11.1.so
init 1 root mem REG 202,2 1661454 8057 /lib64/libc-2.11.1.so
init 1 root mem REG 202,2 236384 8114 /lib64/libsepol.so.1
init 1 root mem REG 202,2 113904 8115 /lib64/libselinux.so.1
init 1 root mem REG 202,2 149797 8050 /lib64/ld-2.11.1.so
kthreadd 2 root cwd DIR 202,2 4096 2 /
然后可以通过lsof -p $pid来查看某个进程的详细打开的文件
gddg:~ # lsof -p 32597
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
bash 32597 root cwd DIR 202,2 4096 16097 /root
bash 32597 root rtd DIR 202,2 4096 2 /
bash 32597 root txt REG 202,2 584016 32203 /bin/bash
bash 32597 root mem REG 202,2 293936 8125 /lib64/libncurses.so.5.6
bash 32597 root mem REG 202,2 1661454 8057 /lib64/libc-2.11.1.so
bash 32597 root mem REG 202,2 19114 8063 /lib64/libdl-2.11.1.so
bash 32597 root mem REG 202,2 263568 8153 /lib64/libreadline.so.5.2
bash 32597 root mem REG 202,2 149797 8050 /lib64/ld-2.11.1.so
bash 32597 root mem REG 202,2 217016 16498 /var/run/nscd/passwd
cat /proc/$pid/io
内核版本大于 2.6.20 就支持通过 cat /proc/pid/io 获取进程的io信息
gddg:~ # cat /proc/4140/io
rchar: 197448798054 // 读出的总字节数，read()或者pread()中的长度参数总和(pagecache中统计而来，不代表实际磁盘的读入)
wchar: 209896059897 // 写入的总字节数，write()或者pwrite()中的长度参数总和
syscr: 6491904 // read()或者pread()总的调用次数
syscw: 13633940 // write()或者pwrite()总的调用次数
read_bytes: 49616125952 // 实际从磁盘中读取的字节总数
write_bytes: 14038130688 // 实际写入到磁盘中的字节总数
cancelled_write_bytes: 2473984 // 由于截断pagecache导致应该发生而没有发生的写入字节数
block_dump
通过 echo 1 > /proc/sys/vm/block_dump 可以把 block 读写 （WRITE/READ/DIRTY）情况dump到日志里面，通过dmesg命令查看
#!/bin/sh
/etc/init.d/syslog stop
echo 1 > /proc/sys/vm/block_dump
sleep 60
dmesg | awk '/(READ|WRITE|dirtied)/ {process[$1]++} END {for (x in process) \
print process[x],x}' |sort -nr |awk '{print $2 " " $1}' | \
head -n 10
#dmesg | egrep "READ|WRITE|dirtied" | egrep -o '([a-zA-Z]*)' | sort | uniq -c | sort -rn | head
echo 0 > /proc/sys/vm/block_dump
/etc/init.d/syslog start
输出类似如下
pdflush(10423): 4000
nginx(1167): 179
nginx(1229): 172
nginx(1187): 111
nginx(1243): 105
nginx(1213): 92
nginx(1233): 69
nginx(1157): 61
nginx(1161): 50
nginx(1155): 32
sudo -s
dmesg -c
/etc/init.d/klogd stop
echo 1 > /proc/sys/vm/block_dump
rm /tmp/disklog
watch "dmesg -c >> /tmp/disklog"
CTRL-C when you're done collecting data
echo 0 > /proc/sys/vm/block_dump
/etc/init.d/klogd start
exit (quit root shell)
cat /tmp/disklog | awk -F"[() \t]" '/(READ|WRITE|dirtied)/ {activity[$1]++} END {for (x in activity) print x, activity[x]}'| sort -nr -k2
iotop类脚本
python版本
#!/usr/bin/python
# Monitoring per-process disk I/O activity
# written by http://www.vpsee.com
import sys, os, time, signal, re
class DiskIO:
def __init__(self, pname=None, pid=None, reads=0, writes=0):
self.pname = pname
self.pid = pid
self.reads = 0
self.writes = 0
def main():
argc = len(sys.argv)
if argc != 1:
print "usage: ./iotop"
sys.exit(0)
if os.getuid() != 0:
print "must be run as root"
sys.exit(0)
signal.signal(signal.SIGINT, signal_handler)
os.system('echo 1 > /proc/sys/vm/block_dump')
print "TASK PID READ WRITE"
while True:
os.system('dmesg -c > /tmp/diskio.log')
l = []
f = open('/tmp/diskio.log', 'r')
line = f.readline()
while line:
m = re.match(\
'^(\S+)\((\d+)\): (READ|WRITE) block (\d+) on (\S+)', line)
if m != None:
if not l:
l.append(DiskIO(m.group(1), m.group(2)))
line = f.readline()
continue
found = False
for item in l:
if item.pid == m.group(2):
found = True
if m.group(3) == "READ":
item.reads = item.reads + 1
elif m.group(3) == "WRITE":
item.writes = item.writes + 1
if not found:
l.append(DiskIO(m.group(1), m.group(2)))
line = f.readline()
time.sleep(1)
for item in l:
print "%-10s %10s %10d %10d" % \
(item.pname, item.pid, item.reads, item.writes)
def signal_handler(signal, frame):
os.system('echo 0 > /proc/sys/vm/block_dump')
sys.exit(0)
if __name__=="__main__":
main()
#!/usr/bin/env perl
# This program is part of Aspersa (http://code.google.com/p/aspersa/)
=pod
=head1 NAME
iodump - Compute per-PID I/O stats for Linux when iotop/pidstat/iopp are not available.
=head1 SYNOPSIS
Prepare the system:
dmesg -c
/etc/init.d/klogd stop
echo 1 > /proc/sys/vm/block_dump
Start the reporting:
while true; do sleep 1; dmesg -c; done | perl iodump
CTRL-C
Stop the system from dumping these messages:
echo 0 > /proc/sys/vm/block_dump
/etc/init.d/klogd start
=head1 AUTHOR
Baron Schwartz
=cut
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use sigtrap qw(handler finish untrapped normal-signals);
my %tasks;
my $oktorun = 1;
my $line;
while ( $oktorun && (defined ($line = <>)) ) {
my ( $task, $pid, $activity, $where, $device );
( $task, $pid, $activity, $where, $device )
= $line =~ m/(\S+)\((\d+)\): (READ|WRITE) block (\d+) on (\S+)/;
if ( !$task ) {
( $task, $pid, $activity, $where, $device )
= $line =~ m/(\S+)\((\d+)\): (dirtied) inode \(.*?\) (\d+) on (\S+)/;
}
if ( $task ) {
my $s = $tasks{$pid} ||= { pid => $pid, task => $task };
++$s->{lc $activity};
++$s->{activity};
++$s->{devices}->{$device};
}
}
printf("%-15s %10s %10s %10s %10s %10s %s\n",
qw(TASK PID TOTAL READ WRITE DIRTY DEVICES));
foreach my $task (
reverse sort { $a->{activity} <=> $b->{activity} } values %tasks
) {
printf("%-15s %10d %10d %10d %10d %10d %s\n",
$task->{task}, $task->{pid},
($task->{'activity'} || 0),
($task->{'read'} || 0),
($task->{'write'} || 0),
($task->{'dirty'} || 0),
join(', ', keys %{$task->{devices}}));
}
sub finish {
my ( $signal ) = @_;
if ( $oktorun ) {
print STDERR "# Caught SIG$signal.\n";
$oktorun = 0;
}
else {
print STDERR "# Exiting on SIG$signal.\n";
exit(1);
}
}
iostat.c
http://code.google.com/p/tester-higkoo/source/browse/trunk/Tools/iostat/iostat.c